ja:documentation:pandorafms:technical_annexes:05_hwg-ste_sensor

差分

このページの2つのバージョン間の差分を表示します。

この比較画面へのリンク

両方とも前のリビジョン 前のリビジョン
ja:documentation:pandorafms:technical_annexes:05_hwg-ste_sensor [2024/08/16 02:53] – junichija:documentation:pandorafms:technical_annexes:05_hwg-ste_sensor [2024/11/16 22:42] (現在) – [Step #2. センサーの設定] junichi
行 37: 行 37:
 ベンダーのドキュメント: ベンダーのドキュメント:
  
-[[http://www.hw-group.com/products/HWg-STE/STE_ip_temperature_sensor_en.html]]+[[http://www.hw-group.com/products/HWg-STE/STE_ip_temperature_sensor_en.html|http://www.hw-group.com/products/HWg-STE/STE_ip_temperature_sensor_en.html]]
  
 センサーのマニュアル: センサーのマニュアル:
  
-[[https://web.archive.org/web/20100307054059/https://www.hw-group.com/download/HWg-STE_MAN_en.pdf]]+[[https://web.archive.org/web/20100307054059/https://www.hw-group.com/download/HWg-STE_MAN_en.pdf|https://web.archive.org/web/20100307054059/https://www.hw-group.com/download/HWg-STE_MAN_en.pdf]]
  
 The most important thing is to configure the access IP address and make sure that the temperature sensor is connected and to know its OID. To do this, access the device via the web and configure: The most important thing is to configure the access IP address and make sure that the temperature sensor is connected and to know its OID. To do this, access the device via the web and configure:
  • ja/documentation/pandorafms/technical_annexes/05_hwg-ste_sensor.1723776816.txt.gz
  • 最終更新: 2024/08/16 02:53
  • by junichi