差分

このページの2つのバージョン間の差分を表示します。

この比較画面へのリンク

両方とも前のリビジョン 前のリビジョン
次のリビジョン
前のリビジョン
ja:documentation:pandorafms:monitoring:16_ncm [2026/04/18 22:36] – [デバイスの設定管理] junichija:documentation:pandorafms:monitoring:16_ncm [2026/05/15 22:20] (現在) – [デバイスの設定管理] junichi
行 345: 行 345:
  
 {{  :wiki:pfms-management-configuration-network_config_manager-ncm_devices-01.png  }} {{  :wiki:pfms-management-configuration-network_config_manager-ncm_devices-01.png  }}
 +
 +<WRAP center round info 90%>
 +
 +In the <wrap :en>**Device details**</wrap> section, the results of the last set of checks will show:
 +
 +  * If you cannot connect or script fails, the status will be red (critical).
 +  * If the process completes but no data (configuration or firmware) is retrieved, the status will be grey (status **unknown**).
 +  * If it is running normally and collecting data, the status will be green (normal).
 +
 +</WRAP>
 +
 +<WRAP center round info 90%>
 +
 +<wrap :ja>**デバイスの詳細**</wrap> セクションには、最後のチェック結果が表示されます。
 +
 +  * 接続できない場合、またはスクリプトが失敗した場合は、ステータスが赤色(障害)になります。
 +  * 処理は完了したが、データ(設定またはファームウェア)が取得されなかった場合、ステータスは灰色(ステータス不明)になります。
 +  * 正常に実行され、データ収集が行われている場合は、ステータスが緑色(正常)になります。
 +
 +</WRAP>
  
 {{  :wiki:pfms-management-configuration-network_config_manager-ncm_devices-02.png  }} {{  :wiki:pfms-management-configuration-network_config_manager-ncm_devices-02.png  }}
行 355: 行 375:
  
 <wrap #ks7_1 /> <wrap #ks7_1 />
 +
 +==== スニペットの実行 ====
 +
 +It will also be possible to execute snippets on any NCM device, i.e. scripts that would not be defined in the templates and that allow code blocks to be executed on demand. These are one-time scripts that are not stored.
 +
 +また、NCM デバイス上でスニペット(テンプレートには定義されていないスクリプトで、必要に応じてコードブロックを実行できるもの)を実行することも可能になります。これらは一度限りの実行で、保存されることはありません。
 +
 +{{  :wiki:pfms-management-configuration-network_config_manager-ncm_devices-snippet_script.png  }}
 +
 +<wrap #ks8 />
  
 ===== ACL ===== ===== ACL =====
  • ja/documentation/pandorafms/monitoring/16_ncm.1776551811.txt.gz
  • 最終更新: 2026/04/18 22:36
  • by junichi