Steps to deploy Software Agents on the devices to be monitored from the Web Console:
Web コンソールから監視対象のデバイスにソフトウェア エージェントを展開する手順:
22
.5985
or 5986
(WinRM® or Secure WinRM®, respectively) on a private local area network. For configuration details, please refer to “Enabling WinRM in MS Windows”.41121
without password or communication encryption (see next point).data_in
directory of PFMS server:22
でSSH でアクセスします。5985
または 5986
(それぞれ WinRM® または Secure WinRM®) を介してアクセスします。設定の詳細については、“MS Windows で WinRM を有効にする” を参照してください。41121
でアクセスできるようにします (次のポイントを参照)。data_in
ディレクトリと同期する必要があります。agent
directory and that the installers of the agent repository can be downloaded. If you upgrade to version 777, you should check that the filters are configured and restart the tentacle_serverd
service.agent
ディレクトリのフィルタが設定され、エージェント リポジトリのインストーラがダウンロードできるようになっている必要があります。バージョン 777 にアップグレードする場合は、フィルタが設定されていることを確認し、tentacle_serverd
サービスを再起動する必要があります。
Once the described steps have been verified, you will be able to access the menu Management → Discovery → Host & Devices → Agent deployment.
説明した手順を確認したら、メニュー 管理(Management) → 自動検出(Discovery) → Host & Devices → エージェントデプロイ(Agent deployment) にアクセスできます。
Any of the following options can be used to define targets for deployment:
次のオプションのいずれかを使用して対象を定義できます。
Finally, the agents will be displayed by clicking Deploy agent to targets.
最後に、エージェントをターゲットにデプロイ(Deploy agent to targets) ボタンをクリックすると、エージェントが表示されます。
Clicking on Scan for targets will display a pop-up box, some of the parameters to be configured are as follows:
ターゲットをスキャン(Scan for targes) をクリックするとポップアップボックスが表示されます。設定するパラメータの一部は次のとおりです。
server_ip
field in the agent configuration file) and port number of the target server where these Software Agents will point to when installed.server_ip
フィールドに対応します) とポート番号。By clicking Scan, a new entry to be executed will appear in the task list.
スキャン(Scan) をクリックすると、実行する新しいエントリがタスク リストに表示されます。
Clicking Add target will display a pop-up box, some of the parameters to be configured are as follows:
ターゲットの追加(Add target) をクリックするとポップアップボックスが表示されます。設定するパラメータの一部は次のとおりです。
server_ip
field in the agent configuration file) and port number of the target server where these Software Agents will point to when installed.server_ip
フィールドに対応します) とポート番号。
If you want to record targets in bulk, you may upload a CSV file with the following format:
対象を一括登録したい場合は、次の形式の CSV ファイルをアップロードできます。
IP; Protocol; Target port; Target agent version; Credential identifier; Tentacle server ip; Tentacle server port; Temp folder
See each of the parameters in the section “Manually define a target”.
各パラメータについては、“対象の手動定義” を参照してください。
You may only schedule deployment against targets whose information is complete, specifying both credentials and software versions to be deployed.
認証情報とデプロイするソフトウェアバージョンの両方が指定され情報が揃っている対象に対してのみデプロイメントをスケジュールできます。
As soon as you have possible targets in the list, the agent deployment can be launched. Select the IP addresses of the targets from the list (only valid targets will appear in Available targets) and with the Deploy button, the agent deployment will start.
リストに対象候補があれば、すぐにエージェントの展開を開始できます。 リストから対象の IP アドレスを選択し (利用可能な対象 には有効な対象のみが表示されます)、デプロイ(Deploy) ボタンをクリックするとエージェントのデプロイが開始されます。
A Discovery task will be automatically created for background deployment, which will be in charge of installing the agent in the desired targets. It will be possible to confirm that the agent was successfully installed from the target list in the deployment center (see summary), as well as to force, enable/disable, delete and edit these tasks.
検出タスクはバックグラウンドでの展開用に自動的に作成され、目的の対象にエージェントをインストールします。 展開センターのターゲットリストからエージェントが正常にインストールされたことを確認したり (概要を参照)、これらのタスクを強制、有効化/無効化、削除、編集したりすることができます。
A list of devices can be imported to represent them as agents using the agent import wizard via CSV.
CSV 経由でエージェントインポートウィザードを使用すると、デバイスのリストをエージェントとしてインポートすることができます。
This utility only creates agents in Pandora FMS for remote monitoring.
このユーティリティは、Pandora FMS にリモート監視用のエージェントを作成するだけです。
You must select the separator used, the server where you want to import and the file that contains the data, then click Go.
使用する区切り記号、インポートするサーバおよびデータを含むファイルを選択し、Go をクリックする必要があります。